Stronghold™ RFM is a hydraulic erosion control product derived from wood cellulose and the most robust agricultural fiber. This is a 100% natural organic material with no synthetic additives or dyes. This environmentally friendly biomass results in a product that requires less water consumption, less time to spray, and has better performance both in the tank and on the ground.
Application Instructions
Mixing Rate: 70 lbs per 100 gallons of water (Rate may vary depending on equipment and conditions)
Application Rate
- Moderate to 3:1 Slopes: 3000 lb/Ac
- 3:1 to 2:1 Slopes: 3500 lb/Ac
- Greater than 2:1 Slopes: 4000 lb/Ac
Specifications
- Colored natural yellow/tan for visual metering purposes.
- Tackifier is non-toxic
- Contains no germination or growth-inhibiting factors and does not form a water-resistant crust that can inhibit plant growth.
- The product is completely biodegradable
- Vegetation establishment of 1370% under ASTM D 7322
- Water holding capacity of 1079.1% under ASTM D 7367
Downloads
Calculator
Hydromulch Comparison Calculator
Enter your current product details below — we'll show you exactly how Stronghold Hydromulch stacks up in tank loads, time on site, and total crew cost.
Your Project & Current Product Details
Please fill in all fields with valid numbers greater than zero.
acres
lbs / acre
lbs
gallons
lbs / 100 gal
hours
$ / hour
Side-by-Side Comparison
| Your Current Hydromulch |
Stronghold Hydromulch |
Your Savings |
|
|---|---|---|---|
| Mulch per Tank Load lbs mixed per full tank | — | — | — |
| Bags per Tank Load bags needed per fill | — | — | — |
| Coverage per Tank Load acres covered per fill | — | — | — |
| Tank Loads Needed total fills for this project | — | — | — |
| Total Bags Required bags for entire project | — | — | — |
| ⏱ Total Time on Site hours for this project | — | — | — |
| 💵 Total Crew Cost labor & equipment for project | — | — | — |
